Full Wave Marine - Jet Ski Brake Light FAQ/

Questions

Click here to BUY NOW at our on-line store

Answers

Is the module and LED light waterproof?

Yes, the circuitry is embedded in epoxy. During installation,
you will seal the LED array with silicone, which is included in the kit. Back to top

How does it work?

Basically, your module is a microprocessor controlled G force sensor.
As you throttle down or decelerate, the module provides power to the LED. Back to top

How much will it drain my battery?

Your battery will never know the difference. The current draw
is 170 Miliamps, which is next to nothing. Back to top

Do I need to install a fuse?

No, we've already installed one for you. The system is protected
with a standard .5 amp fuse and can be easily replaced if necessary. Back to top

How do I know it's working?

The kit comes with a high intensity panel mount LED that mounts
in your dash. It comes on when the rear array does, so you'll know
its working. In addition, circuit fault protection is built in. If for any
reason the rear array is not functioning correctly, the dash LED
will blink rapidly to warn you of a problem. Back to top

What tools are required for the installation?

You will need a drill; 9/16 & 11/64 drill bits; phillips screwdriver;
wire cutters, preferably a soldering iron & solder. Back to top

How long does it take to install?

It will take 2-3 hours for the jet ski if you follow our advice and solder
all of your connections then heat shrink. The trailer & vehicle connections
will take about 2 hours. Much less if you use butt connectors. Back to top

Can I call you for installation help?

We include easy to follow instructions however, you must possess basic knowledge of 12 volt electrical systems. There are far too many skis and vehicles for us to provide specific instructions for however, you can post a question in our installation forum for assistance. If you feel uncomfortable doing the install yourself, please seek professional assistance or see your dealer. Back to top

My dog ate my module, can I get a new one?

If you accidentally damaged or lost a part, email our customer service dept. to purchase a replacement. We only ship replacement parts to existing customers. Back to top

How do you ship?

We use Australia Post Express Post. All items are shipped within 48 hours, and usually the same day if the order is received before noon. We ship Monday through Friday excluding Holidays. Back to top

Do you backorder?

No. All of our products are hand made by skilled technicians in the good old USA. We adhere to strict standards and quality, so our production
is limited. If we are out of stock, please check back later. We don't want to take money for something we can't ship. It's just not good business...
Back to top

At Full Wave Marine, we offer innovative products which will make your recreational sporting life more enjoyable, safe and most importantly EASY.

We are dedicated to either sourcing innovative high quality products or putting together our own innovative products specifically for for the recreational industry that either increase safety, make you life easy or make your life more enjoyable.

Full Wave MArine is the exclusive Australian Distributor for the Jet ski Brake Light Kits from PWC Industries and also the Waterproof Full Wave Audio kits designed for Personal Watercraft, Boats, All Terrain Vehicles and motorcycles.

We have also put together our own products which we have come up with from our own personal experiences. These products were generally products that we came up with to make our own lives easier as boaties/PWC'ers/4WD and camping enthusiasts.